跳至产品信息
Description:
【Type】Watch waterproof tester machine, used for testing the water resistance of watch cases.
【Working Principle】It operates based on air pressure resistance testing. The air pressure can be adjusted up to a maximum of 6 ATM, allowing you to test watches with waterproof levels up to 6 ATM.
【Clear Body】The cylinder is transparent, making it easy to observe which part of the watch is not waterproof.
【Accurate Measurement】Please refer to the air pressure gauge and bubbles to adjust the machine.
【Easy to Use】Perfect for testing the water resistance of new watches; a professional testing machine. Please follow the small tips in the description.
Specification:
Material: Aluminum
Size (L x W x H): 24.3 x 13 x 28.2 cm / 9.57 x 5.12 x 11.10 inches
Rod Length: 28 cm / 11.02 inches
Diameter: 7 cm / 2.76 inches
Air Pressure: Maximum 6 ATM
Tips:
1. Pull the pocket watch rod as far as possible.
2. Loosen the two screws and remove the cover.
3. Fill with water up to the designated red line on the bucket.
4. Place the watch on the benchmark.
5. Install the lid and tighten the screws.
6. Shake the pressure lever to increase the air pressure to 3 ATM (the official standard of the Swiss watch industry), then wait three minutes to let the air fill the entire watch.
7. Press the pocket watch rod to immerse the watch in water, then press the exhaust button to release the air.
8. When the pressure drops, observe whether bubbles appear on the watch. If bubbles appear, the watch is not properly sealed; quickly pull out the benchmark and remove the watch. If no bubbles appear, the watch is well sealed.
Package Includes:
1 Set Watch Waterproof Tester Machine
促销价
$225.89
常规价格
$283.29
【Type】Watch waterproof tester machine, used for testing the water resistance of watch cases.
【Working Principle】It operates based on air pressure resistance testing. The air pressure can be adjusted up to a maximum of 6 ATM, allowing you to test watches with waterproof levels up to 6 ATM.
【Clear Body】The cylinder is transparent, making it easy to observe which part of the watch is not waterproof.
【Accurate Measurement】Please refer to the air pressure gauge and bubbles to adjust the machine.
【Easy to Use】Perfect for testing the water resistance of new watches; a professional testing machine. Please follow the small tips in the description.
Specification:
Material: Aluminum
Size (L x W x H): 24.3 x 13 x 28.2 cm / 9.57 x 5.12 x 11.10 inches
Rod Length: 28 cm / 11.02 inches
Diameter: 7 cm / 2.76 inches
Air Pressure: Maximum 6 ATM
Tips:
1. Pull the pocket watch rod as far as possible.
2. Loosen the two screws and remove the cover.
3. Fill with water up to the designated red line on the bucket.
4. Place the watch on the benchmark.
5. Install the lid and tighten the screws.
6. Shake the pressure lever to increase the air pressure to 3 ATM (the official standard of the Swiss watch industry), then wait three minutes to let the air fill the entire watch.
7. Press the pocket watch rod to immerse the watch in water, then press the exhaust button to release the air.
8. When the pressure drops, observe whether bubbles appear on the watch. If bubbles appear, the watch is not properly sealed; quickly pull out the benchmark and remove the watch. If no bubbles appear, the watch is well sealed.
Package Includes:
1 Set Watch Waterproof Tester Machine